Slide-Lag

Superior Traction
Slide-Lag's rubber compounding and tread-like surface which combines double chevron grooves and shallow slits on individual pads promote belt drive and maximum traction.   Slide-Lag has proven superior to all other lagging methods in a wide variety of applications thruoughout the world.  This is particularly true where drive pulley slippage has been a problem. 
Longer Life
The retainers which form an integral part of the HOLZ Slide-Lag installation method provide a strong, virtually unbreakable bond between the lagging and pulley and pulley face.  This exclusive feature eliminates costly lagging failures from separation and loss of adhesion, and insures years of trouble free performance.  Pads are locked in place to prevent lateral movement using simple procedures outlined in Slide-Lag installation instruction.
Abuse Resistance
Slide-Lag is fabricated from top quality, abrasion resistant elastomers to a maximum practical thickness capable of withstanding the most severe operating conditions.   Consequently, failures from rubber tearing or gougingare dramatically reduced, and maintenance costs are kept at a minimum.
Minimizes Downtime
Easy Installation
Slide Lag can normally be installed without moving the pulleys from operating position to opening the belt spice.  Simply release belt tension to allow pulley rotation, attach retainers, slide and lock pads in place, tighten belt and resume operation.  No hole drilling or cement is required.  Slide-Lag will effectively other types of lagging using the same clean-up procedures that are always required to remove other types of old lagging.  However, once Slide-Lag is installed, future clean-up problems for lagging replacement are eliminated.  When ordering new equipment, specify Slide-Lag replaceable lagging for preinstallation prior to delivery.|
Quick Replacement
Replacing Slide-Lag is even more convenient and easier to do since retainers are already in position.  High costs generated by pulley removal for shipment to a rubber fabricator just to have lagging replaced are totally erased.  If scheduled maintenance time is limited, pads can be replaced a few at a time during brief shutdowns that always occur during day-to-day operation.
Self Cleaning
Slide-Lag's unique combonation of double chevron grooves, shallow slits and individual pads results in a kneading or flexing action that actively resists material build-up.   Foriegn material works its way to the edges of the pulley through the channels between the pads where it falls away.  This continous, built-in, self-cleaning action keeps material build-up problems down, and associated belt tracking troubles virtually disappear.

How to Order
Just specify the quantity, pulley diameter and "Style 5".  You will receive equal footage of  "double" retainers and 1/4 footage of "single" retainers free.  Shipping weight approx. 17lbs.

Random Splice Layout
Easy to install-no bolts, screws or adhesives.  Simply weld a retainer strip, lay in a pad, weld in another strip, lay in another pad, etc. until the job is finished.   Installation takes but a few hours.
Replacement can be done in minutes-simply by sliding the pads in or out from the ends of the pulley--without removing the pulley from the conveyor.

USE THIS TABLE TO DETERMINE THE NUMBER OF 6 FOOT LENGTHS REQUIRED FOR ONE PULLEY.