Material Handling Hose

Sand Blast Hose & Couplings- 4 Ply
A tough hose for extreme service in blasting and shot applications. Tube is abrasion resistant, static dissipating rubber.

Sand Blast Hose - 2 Ply
A more flexible alternative to the 4 ply hose.

Elephant Trunk Hose
Cement discharge by gravity flow. Constructed with a 1/8" thick gum tube to withstand abrasion. Contains 2 plies of cotton duck material with a black rubber cover.

Pure Gum Sleeves
These are manufactured in our own shop to your specifications. Sizes shown are 1/4" thick Pure Gum Sheet Rubber and will withstand severe abrasive conditions. Allow approximately 5 days for delivery.

Dry Bulk Materials/ Cement Hose
Bulk loading and unloading of dry powders such as cement, lime, fertilizers, foundry sand, etc. Tube is compounded for cutting and abrasion resistance. Cover is weather and wear resistant. Carcass is constructed of synthetic yarn.

Hot Air Blower Hose
For use in conjunction between compressors and storage tanks. Hose component will withstand intermittent temperatures to 350°F. Tube is heat, ozone and weather resistant. Carcass is spiral wire helix between braids of synthetic yarns. Cover is heat, ozone and weather resistant.

Hot Tar and Asphalt Hose - Metal Interlocked
A flexible, heavy duty, fully interlocked and packed galvanized steel hose for handling hot asphalt products. End fittings are reusable, pack-on malleable iron with male IPT or female IPT swivels. Maximum temperature to 450°F. 100psi maximum working pressure.

Hot Tar and Asphalt Hose - Rubber
For conveying hot tar, asphalt and oil at temperatures up to 350°F in continuous service and intermittent service up to 400°F. Replaces heavy, hard to handle metal hose in many installations. Easy to bend into loading position, no internal corrugations to become clogged with congealed asphalt. Can be used for regular petroleum application during off season. Can be used for both discharge and full vacuum service.